Cutting and receiving: Reed ON, Cam ON(with smaller angles), Reed
ON, Cutting ON, Reed ON(about in 0.2 sec.), Cutting OFF, Cutting ON, Off
again, Reed ON, paper receiving motor is OFF. After he photocell points and
the photocell aimed, the paper receiving motor is OFF. (Even if the paper
receiving motor is at manual operation, it is still controlled by the photocell or
the Rack.

Резка и приемка: валик ON, кулачок ON (с меньшими углами), валик
ON, режущая установка ON, валик ON (примерно через 0,2 сек.), режущая установка OFF, режущая установка ON, режущая установка OFF, валик ON, двигатель приемки бумаги OFF. После совмещения контактов фотоэлемента с фотоэлементом двигатель устройства приемки бумаги отключается (даже при ручном управлении двигателем устройства приемки бумаги, управление двигателем производится фотоэлементом или модулем таймера)

This type machine includes cap loading, cap
pressing, automatic delivering paper, cutting, lid drawing, lid loading, dot
sealing, receiving paper, sealing, discharging devices.

II. Description:
1. Transmission motor: 1/2HP or 1HP
2. Speed Reducing motor: From type 70 to type 100.
3. Temperature controller: Adjustable from 0 to 300C.
4. E-Rack: Electronic Parts adopted, bringing stable and safe wiring.
5. Photocell: High sensitivity and great precision (Skip if there is no this
device.)
6. Packing container feeder: Depending on customers’ demands and
machinery types.
7. Sealing device: A set of heat-resist heater.
8. Covering device: Consisting of a vacuum generator and silica gel. With
high position fix with capacity reaches to 99.7%.
9. Cutting device: A set of special alloyed steel.