DictionaryForumContacts

 adelaida

link 24.07.2012 15:05 
Subject: G gen.
Technical specification
Temperature Rating: 302 degF (150 degC)
Pressure Rating 15 kpsi (103.4 MPa)
Length: 24.8 in (630 mm)
Outside Diameter: 1 11⁄16 in (43 mm)
Weight: 10.8 lb (4.9 kg)
Service: H2S service
Телеметрическая система замеров в скважинах

Basic Measurement Cartridge
The basic measurement cartridge (BMC) is at the heart of the digital slickline toolstring. It
provides the power to all the sensors, as well as the telemetry to send the data from each
sensor to the surface at the proper rate. In addition, it receives control signals from the
surface transceiver.
The BMC is equipped with sensors to measure the downhole tension, the well deviation, the
internal temperature, and the jarring shock efficiency. Each sensor’s data is sent via telemetry
to the surface and is also recorded in the memory.

Top thread: 1 3⁄16 in 12UN (GO type) female
Bottom thread: 1 33⁄64 in 12 Stub ACME (BEST) male
Memory Capacity: 18 h
Sampling Rate: 0.5 s (each data set)
Downhole Tension Scale: -100–1,000 lbs (-50–500 kg)
Accuracy: +/- 2% from -50 to 100 kg (+/- 1% from 100
to 500 kg)
Hysteresis: 1% FS
Well Deviation Range: 0–90°
Accuracy: +/- 1°
Resolution: 0.5°
**Shock Acceleration Range: +/- 250 G
Accuracy: +/- 2 G
Resolution: 1 G

Большое спасибо.

 Mike Ulixon

link 24.07.2012 17:22 
Ой, как многа букафф!
Это Ваше пресловутое "G" всего-навсего "ускорение свободного падения". Физику в средней школе проходили? 9,81 м/с2 для Земли на поверхности (не бог весть какое, между нами говоря, разрешение... А точность и того меньше. На уровне среднебытовых приборов) ;-)

 Serg_2012

link 24.07.2012 17:46 
Вы правы, букафф хватает, а вот ума у аскера точно не достает.

Хоть бы написал(а), что конкретно надо.

Пожелаем ей 3G.

 adelaida

link 25.07.2012 5:37 
Serg_2012 - я вас, кажется, не оскорбляла? кто дал вам право меня оскорблять?
Еще не известно, у кого ума больше, сомневаюсь, что ваше хамство - показатель вашего ума.

Mike Ulixon - спасибо!

 

You need to be logged in to post in the forum