Subject: установка плавников на серф (инструкция) 1. Drop the fin screw tab into the fin box and orient so that it lays flat and facing up and slides freely in the track. The tab should be inserted into the center portion of the fin box at an angle to allow it to slide in easily.2. Insert the center fin into the box back end first. The pin located at the rear base of the fin should be inserted into the center portion of the box at the enlarged opening and slid back. Please note that adjusting the fin forward will allow for a looser feel in tracking and overall ride. Moving the fin to the back of the box will give added tracking and stability. 3. With the fin in place, align the screw hole in the front base portion of the fin with the fin screw tab. Помогите, пожалуйста. Возможно тут есть те, кто представляет, как это выглядит вживую) в честности, в пункте 1: orient so that it lays flat and facing up and slides freely in the track и еще -в комплекте идет fin screw key (п.4 Insert the screw and begin to tighten....) - это будет отвертка? или г. ключ? На сколько я знаю, то обычно на досках используются винты (т.е. нужна отвертка для установки), но что в этом случае...к сожалению фотографии нет |
здесь как раз показана ваша процедура (на 1:25 операция, описанная у вас в п.1) NB: screw plate, in this video is what they call screw tab in your text embed video="Install FCS fins for a 2+1 fin setup"--> Learn How to install FCS fins for a 2+1 fin setup. For more Surfing How-To Videos & Articles, visit WonderHowTo. "640" height="385"> "movie" value="http://www.youtube.com/v/vaBlMdKbC1M&autoplay=0&rel=0&vq=2"> "wmode" value="transparent"> |
спасибо! |
You need to be logged in to post in the forum |