38204 T1 boring plane up timeout
The boring plane is down despite the fact that the up command is activated (see time set in the ‘Boring plane up/down timeout’ K Constants parameter)
The cycle in progress is halted.
Check the boring plane down limit switch
Check the outputs of the PLC and the actuators involved in the boring plane up command plus any mechanical interferences
38208 T1 boring plane down timeout
The boring plane is not down despite the fact that the down command is activated (see time set in the ‘Boring plane up/down timeout’ K Constants parameter).
The cycle in progress is halted
Check the boring plane down limit switch
Check the outputs of the PLC and the actuators involved in the boring plane down command plus any mechanical interferences.
38209 Stop down timeout
The Stop is up despite the fact that the down command is activated (see time set in the ‘Stop up/down timeout’ K Constants parameter)
The cycle in progress is halted
Check the stop up limit switch
Check the outputs of the PLC and the actuators involved in the stop down command plus any mechanical interferences.
38210 Stop up timeout
The Stop is not up despite the fact that the down command is no longer activated (see the time set in the ‘Stop up/down timeout’ K Constants parameter)
The cycle in progress is halted
Check the stop up limit switch
Check the outputs of the PLC and the actuators involved in the stop down command plus any mechanical interferences.

заранее спасибо