 |
|
Subject: TANG CTRL gen. доброе утро!столкнулась с переводом кодов ЧПУ, в примерах кодов программы встречается много не понятного! подскажите пожалуйста , что может такое быть M28 (* TANG CTRL ON *)?Вот как все это выглядит: (* Used tools: *) (* Plasma Bevel - T211 *) (* Plasma Straight - T111 *) (* ------------ *) (*Thickness = 5.00*) "SHEET_DIM 3000 1500 4500000 5.00 4500000 - G90 (* ABSOLUTE *) "PART B M6 T211 (* SET TOOL FOR BEVEL CUTS *) G0 X14.00 Y23.00 G0 X137.084 Y72.026 (* LINE *) G41 (* COMPENSATION LEFT *) M38 L-90.00 L0.00 (* AZIMUT LIMITS *) G0 B90.00 (* SET AZIMUTH *) (* this will rotate bevel head parallel to contour and avoid turning of head between lead-in and contour *) M29 A-45.00 (* SET CHAMFER *) M37 (* AZIMUT NOW *) (* B axis will be set now according to previous G0 Bxxx and correction needed for given bevel angle *) M20 (* HEAD DOWN *) M3 (* TOOL ON *) G1 Y80.026 (* LINE – lead-in *) M28 (* TANG CTRL ON *) G1 Y105.026 (* LINE *) (* at this point tangential control rotates B axis to next direction *) G1 X232.084 (* LINE *) M27 (* TANG CTRL OFF *) G1 X236.084 (* LINE – lead-out *) M5 (* TOOL OFF *) M21 (* PARK *) G40 (* COMPENSATION OFF *) M32 (* PARK ROTATOR *) M6 T111 (* SET TOOL FOR STRAIGHT CUT *) G0 X232.084 Y118.026 G41 (* COMPENSATION LEFT *) M20 (*HEAD DOWN *) M3 (* TOOL ON *) G1 Y110.026 (* LINE *) G1 Y10.026 (* LINE *) G1 X132.084 (* LINE *) G1 Y40.026 (* LINE *) G1 X142.084 (* LINE *) G3 X142.084 Y80.026 I142.0844 J60.0263 (* ARC *) G1 X132.084 (* LINE *) G1 X128.084 (* LINE *) M5 (* TOOL OFF *) M21 (* PARK *) G40 (* COMPENSATION OFF *) M30 (* END *) |
|
там внизу написано что делает этот оператор (* at this point tangential control rotates B axis to next direction *) |
| You need to be logged in to post in the forum |