Procedure
– Switch off the ignition,
– disconnect the return pipes from the four injectors,
– cap the pump venturi tube to prevent the low pressure circuit from depriming,
– connect the four transparent pipes in place of the return pipes,
– disconnect the low pressure actuator from the pump (brown IMV connector) and connect a test IMV or the adapter.
– disconnect the four injectors electrically,
– switch on the ignition and engage the starter for 5 seconds,
– measure the amount of diesel fuel in each pipe.

Replace the injector(s) with a leak return greater than 10 cm.
Меня интересуют здесь два момента:
Injector flow measuring kit;
Replace the injector(s) with a leak return greater than 10 cm.
Буду весьма признателен.