|
вот пояснение. вероятно, для облицовки горизонтальных или вертикальных поверхностей http://www.hardwoodweb.com/pdf/catalogue_laminates.pdf Question
What the difference is between vertical and horizontal grade laminate? I have a lot of jobs coming up with 1" - 1 1/2" radiused corners. Can I use the horizontal grade or do I have to buy a whole separate piece for the edge? I use 3M nf 30 water base adhesive, which works great, but will it work on the radiuses?
Forum Responses
(Laminate and Solid Surfacing Forum)
From contributor M:
The basic difference is, depending on who the manufacturer of the laminate is, that vertical grade laminate is about 40% thinner than horizontal grade laminate. If you are making tops, you should use the thicker laminate on all edges. Increase your radius to at least 4" unless you are going to heat and clamp the laminate. If you have to have the small radius, I think you will have to use the thinner laminate.
http://www.woodweb.com/knowledge_base/Vertical_versus_Horizontal_Grade_Laminate.html
|
