At tender Vendor to furnish:
Mass of motor (kg)
Moment of inertia 'j' (kg m2)...

On receipt of order Vendor to furnish:
Calculated critical speed(s) (1/min)
/ Transient air-gap torque plots:
with two and three-phase short-circuit at the motor terminals, and with their respective frequencies over a 200 ms time period (Nm) /
Stalling times, hot and cold (s) at 100% & 80% Un
Running-up times at 100% & 80%

Коллеги, ваши мнения, пожалуйста...