This is with the slip set only the block way.

Встречается в таком контексте:

First remove the cap from the check valve. (5:33) Then fit the pump on Use very loosely right at first. (5:44) Fill the pump with W 15 fluid that would purge the Pump now. (5:53) And the reason to do this is to keep from loosing more air into the system. (6:00) Pump very slowly until you get this fluid leak right here, coming out right here, then, then we tighten. (6:11) It’s, yes, it’s very snug and then we can go ahead and pump up the same segment until we get a gap here approximately equal; these three gaps are approximately equal. (6:27) This is with the slip set only the block way. (6:33) Then after you achieved that, remove the pump, then replace the cap, (6:54) and just put the cap back on just snug, it don’t have to be real tight.

Заранее спасибо!