 |
|
Subject: suction ball gen. контекст: As shown in Figure 1, including the tube 10, the power cord 1, the cylindrical aluminum cap 2, the tapered silicone cap 3, the connecting pipe 4, the hot and cold joint 5, the heating wire 6, the heat conducting liquid 7, The heating wire 6 is installed in the pipe body 10, the heating wire 6 is in the form of a "U" type, both ends of the heating wire 6 are connected to the power supply line 1 through the hot and cold connection 5; the power supply line 1 in the pipe body 10 enters A tapered silicone cap 3 and a cylindrical aluminum cap 2 are connected by a connecting pipe 4 and a pipe body 10. The tapered silicone cap 3 and the cylindrical aluminum cap 2 are connected by a connecting pipe 4 and a pipe body 10, The body 10 is filled with a thermally conductive liquid 7, and the suction ball 8 is attached to the opening of the other end of the pipe body 10 and sealed with a plug 9. The surface of the suction ball 8 is made of a flexible material, and when the pressure is too large or too small, Compression and release operation to balance the pressure; the heating wire 6 comprises three layers, the inner layer is an alloy wire layer, the intermediate layer is a silicone rubber layer and the outer layer is a Teflon coating; the alloy wire layer is 7 parts of nickel chromium Copper alloy winding.помогите понять, что это за suction ball как можно более точно |
|
link 23.07.2017 14:19 |
| You need to be logged in to post in the forum |